Buy Online, Pickup In Store
Currently shopping at FLORISSANT - LINDBERGH
Buy Online, Pickup In Store
DRYLOK 27513
latex base Drylok® Masonry waterproofer is the manageable way to solve water seepage problems. Reduces radon gas penetration by reducing vapor transfer.
| Applicable Materials | : | Acrylic, Cement, Latex Alkyd, Oil Base, Polyvinyl |
| Application Method | : | Brush, Roller, Spray |
| Application Temperature | : | 50 deg F |
| Base Type | : | Latex |
| Boiling Point | : | 100 deg C |
| Color | : | White |
| Compositions | : | Quartz, Limestone, Mica, Diethylene Glycol Monomethyl Ether, Titanium Dioxide |
| Container Type | : | Pail |
| Coverage Area | : | 75 to 100 sq-ft/gal |
| Density | : | 12.7 to 12.8 lb/gal |
| Drying Time | : | 2 to 3 hr |
| Flash Point | : | 5001 deg C |
| Form | : | Liquid |
| Net Content | : | 1 gal |
| Odor/Scent | : | Ammonia |
| Resists | : | Hydrostatic Pressure, Wind Driven Rain |
| Specific Gravity | : | 1.5 |
| VOC Content | : | <100 g/L |
| Viscosity | : | 110 to 120 ku |
| pH Range | : | 9.5 to 9.9 |
- Guaranteed to stop water
- Helps protect against radon gas penetration by reducing vapor transfer
- Low odor formula complies with all current VOC requirements
- Breathable film will not trap moisture in the masonry
- Easy clean-up with warm, soapy water
- Four ready-mixed, flat finish colors
- No pre-mixing or pre-wetting
- Drylok® latex base masonry waterproofer may be top-coated with a good quality latex paint for decorative purposes
SDS