Buy Online, Pickup In Store
Currently shopping at FLORISSANT - LINDBERGH
Buy Online, Pickup In Store
Loctite 2546759
Loctite® Power Grab® Tub surround interior construction adhesive has been specifically designed to bond most bathroom and shower enclosures. This construction adhesive has 0 sec instant grab and dries faster than previous Power Grab formulas. It is unaffected by moisture, steam, water, heat or cold when fully cured. Loctite® power grab tub surround has very low-odor and requires only soap and water to clean up. It does not require venting like most solvent-based tub surround adhesives.
| Applicable Materials | : | Ceramic, Gypsum, Plastic, Wood |
| Base Type | : | Acrylic |
| Boiling Point | : | 212 deg F |
| Color | : | White |
| Compositions | : | Limestone, Silica, Amorphous, Fumed, Crystal-Free, Distillates (Petroleum), Hydrotreated Light, Quartz (SiO2) |
| Container Type | : | Cartridge |
| Coverage Area | : | 30.6 ft |
| Density | : | 0.62 |
| Drying Time | : | 24 hr |
| Flash Point | : | >200 deg F |
| Form | : | Solid |
| Media | : | Carbon Dioxide, Fine Water Spray, Foam, Powder, Water Spray Jet |
| Net Content | : | 10 oz |
| Odor/Scent | : | Mild Acrylic |
| Resists | : | Heat, Moisture, Steam, Water |
| Setting Time | : | 10 min |
| Shear Strength | : | 200 psi |
| Specific Gravity | : | 1.03 to 1.07 |
| Temperature Rating | : | >50 deg F |
| VOC Content | : | 27 g/L |
| Viscosity | : | 2, 000, 000 mPa-s |
| pH Range | : | 7 to 9 |
- Ideal for bonding tub surrounds to most common building materials
- No etching or burn through assured
- No venting or flashing required
- 25% more initial tack than previous Power Grab formula
- Paintable, low-odor
- Soap and water cleanup
- Reduces the need for bracing
SDS