Protective Coating PC-Concrete 07256 Anchoring and Crack Filling Epoxy, Paste, 250 mL Cartridge, Tube Cartridge

PC-Concrete™ anchoring and crack filling epoxy is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hr at standard temperature. Nothing stronger for your anchoring applications. PC-Concrete™ is a two component (1:1 ratio), 100% solids, high-modulus and structural epoxy paste. PC-Concrete™ is a solvent-free, no odor, high-strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 oz cartridge system and mixed through a mixing nozzle using a standard size caulking gun. (We recommend at least an 18:1 thrust ratio). PC-Concrete™ is also provided in a 22 oz dual cartridge system for Contractors and Professionals. This size requires a 600 ml high-thrust dual cartridge dispensing gun. For filling larger cracks and cavities use the 102 oz bulk kit. PC- Concrete™ will not shrink. Suitable for interior and exterior applications. Can be applied to wet and underwater surfaces.